Farsk3 User Manual
Model LV_FR03 · Dual-Fan Cooling Seat Liner · Read before first use and keep for reference.
1. In the box
- Farsk3 cooling seat liner (fan unit pre-installed)
- LOVON ice pack ×1
- Extended USB power cable
Not included: USB power bank. Use a certified power bank with a stable output of 5V / 2.4A or higher.
Compatibility check
Pick your setup and we'll tell you straight away.
2. Installation
- If desired, place the frozen ice pack into the back pocket of the liner.
- Lay the liner flat on the stroller or car seat and pull the harness strap through the center opening.
- Buckle the harness to secure the liner and prevent sliding. Use the elastic band at the head section for extra hold.
- Check that the fan vents at the base are clear and unobstructed.
- Pull the USB cable out through the side opening and zip the pocket completely.
- Connect the cable to your power bank. Use the inline controller to power on and select speed 1–3.
3. Operation
| Speed levels | 3 (low / medium / high) via inline controller |
| Power input | USB, 5V / 2.4A or higher recommended |
| Typical runtime | Approx. 6–8 hours on a 10,000mAh power bank |
| Noise level | Under 40 dB (39.4 dB measured indoors) |
| Ice pack | Freeze at least 4 hours before use; the pack cools the airflow only and never touches skin |
4. Safety information
Important: Never leave a child unattended. Always secure the harness according to your stroller or car seat manufacturer's instructions. Do not cover the fan vents. Keep the power bank and cable away from the child. Do not use with damaged cables. For car seat use, consult your car seat manual regarding accessories.
- Do not use in wet conditions or near water; power down and protect the electronics if rain starts.
- Do not insert objects into the fan vents.
- Discontinue use if the fan makes unusual noise or the liner shows damage.
- Do not use uncertified or unknown-brand power banks — damage caused by them is not covered by warranty.
5. Care & cleaning
- Power off and unscrew the fan units; keep the screws safe.
- Twist and remove the fan covers.
- Open the zipper at the base of the liner and carefully pull out both fan units and cables.
- Hand wash the liner with a neutral detergent (recommended), or machine wash in a laundry bag on a gentle cycle. Do not spin-dry.
- Air dry in the shade. Ensure the liner is 100% dry before reinstalling the fans, outlet facing up and locked in place.
6. Specifications
| Model | LV_FR03 |
| Dimensions | 340 × 900 mm |
| Weight | 0.8 kg |
| Liner material | Polyester fiber (4-layer: ice-silk mesh, targeted vents, honeycomb core, anti-slip Oxford base) |
| Fan housing | PBT + ABS |
| Standards | Tested to EN and ASTM standards; verified by SGS and Bureau Veritas |
7. Warranty & support
Farsk3 is covered by a 1-year limited warranty against manufacturing defects and a 30-day return guarantee. Support: service@banfubi.com · +1 (814) 351-9522 (Mon–Fri 10am–6pm EST).